Friday, 19 March 2010

Latest HC tests in Manchester

While waiting for the storage that we are buying with the current tender that will bring us to 320 TB of usable space we are fixing the configuration to optimise the access on the current 80TB.
So we have cabled the 4 data servers in the configuration they and their peers will have eventually. The last test

http://gangarobot.cern.ch/hc/1203/test

was showing some progress.

We run it for 12 hours and we had 99% overall efficiency. In particular if compared to test

http://gangarobot.cern.ch/hc/991/test.

the other metrics look slightly better. The most noticeable thing, rather than the plain mean values, is the histogram shape of cpu/wall clock time and events/wallclock. They are much healthier with a bell shape instead of a U one. (i.e. especially in the cpu/wall clock we have a more predictable behaviour. In this test the tail of jobs towards zero is drastically reduced). This is only one test and we are still affected by a bad distribution of data in DPM as they are still mostly concentrated on 2 servers over 4. There are also other things we can tweak to optimize access. The next steps to do with the same test (for comparison) are:

1) Spread the data more evenly on the data servers if we can se04 was hammered for a good while and had load 80-100 for few hours according to nagios.

2) Increase the number of jobs that can run at the same time

3) Look at the distribution of jobs on the WN.This might be useful to know how to do it when we will have 8 cores rather than two.

4) Look at the job distribution in time.

Thursday, 15 October 2009

Squid cache for atlas on a 32bit machine

I installed the squid cache for atlas on a SL5 32bit machine. There are no rpms from the project in 32bit. There is a default OS squid rpm but it is apparently bugged and the request is to install a 2.7-STABLE7 version. So I got the source rpm from here

https://twiki.cern.ch/twiki/bin/view/PDBService/SquidRPMsTier1andTier2

rpmbuild --rebuild frontier-squid-2.7.STABLE7-4.sl5.src.rpm

it will compile the squid for your system. And create a binary rpm in

/usr/src/redhat/RPMS/i386/frontier-squid-2.7.STABLE7-4.sl5.i386.rpm

rpm -ihv /usr/src/redhat/RPMS/i386/frontier-squid-2.7.STABLE7-4.sl5.i386.rpm

It will install everything in /home/squid - apparently it is relocatable but I don't mind the location so I left it.

Edit /home/squid/etc/squid.conf

Not everything you find in the BNL instructions is necessary. Here is my list of changes

acl SUBNET-NAME src SUBNET-IPS
<---- there are different ways to express this
http_access allow SUBNET-NAME
hierarchy stoplist cgi-bin ?

cache_mem 256 MB
maximum_object_size_in_memory 128 KB

cache_dir ufs /home/squid/var/cache 100000 16 256

maximum_object_size 1048576 KB

update_headers off

cache_log /home/squid/var/logs/cache.log
cache_store_log none

strip_query_terms off

refresh_pattern -i /cgi-bin/ 0 0% 0

cache_effective_user squid
<--- default is nobody doesn't have access to /home/squid
icp_port 0


Edit /home/squid/sbin/fn-local-squid.sh
Add these two lines

# chkconfig: - 99 21
# description: Squid cache startup script


then

ln -s /home/squid/sbin/fn-local-squid.sh /etc/init.d/squid
chkconfig --add squid
chkconfig squid on


Write to Rod Walker to authorize your machine in the gridka Frontier server (until RAL is up that's the server for Europe) if you can set up an alias for the machine do it before writing him.

To test the setup

wget http://frontier.cern.ch/dist/fnget.py
export http_proxy=http://YOU-SQUID-CAHE:3128
python fnget.py --url=http://atlassq1-fzk.gridka.de:8021/fzk/Frontier --sql="SELECT TABLE_NAME FROM ALL_TABLES"


if you get many lines similar to those below

COMP200_F0027_TAGS_SEQ
COMP200_F0037_IOVS_SEQ
COMP200_F0020_IOVS_SEQ


your cache is working.

Wednesday, 19 August 2009

Manchester update

I fixed the site bdii problem i.e. the site static information 'disappeared'. It didn't actually disappear it was just declared under mds-vo-name=resource instead of mds-vo-name=UKI-NORTHGRID-MAN-HEP AND THEREFORE GSTAT COULDN'T FIND IT. This was due to rgma and site bdii conflict. The rgma bdii (that didn't exist in very old versions) needs to be declared in the BDII_REGIONS in YAIM. I knew it but forgot completely I already fixed it when I reinstalled the machine few months ago so I spent a delightful afternoon parsing ldif files and ldap output, hacked the ldif, sort of fixed it and then asked for a proper solution. So... here we go I'm writing it down this time so I can google for myself. On the positive side I upgraded now to the latest version both site and top bdiii and the resource bdii on the CEs. So we now have shiny new attributes like Spec2006 &Co.

I also upgraded the CEs trying to fix our random instability problem which afflicts us. However I upgraded online without reinstalling everything and it makes me a bit nervous thinking that some files that needed change might have not been edited because they already exist. So I will completely reinstall the CEs starting with ce01 today.

Tuesday, 5 May 2009

Howto publish Users DNs accounting records

To publish the User DN records in the accounting you should add to your site-info.def the following line

APEL_PUBLISH_USER_DN="yes"

and reconfigure your MON box. This will change the parser configuration file

/opt/glite/etc/glite-apel-publisher/publisher-config-yaim.xml

replacing this line

<JoinProcessor publishGlobalUserName="no">

with this one

<JoinProcessor publishGlobalUserName="yes">

this will affect only on the new records.

If you want to republish everything you need to replace in the same file

<Republish>missing</Republish>

with this line using the apropriate dates

<Republish recordStart="2006-02-01" recordEnd="2006-04-25">gap</Republish>

and publish a chunk of data at the time. The documentation suggests one month at the time to avoid to run out of memory. When you have finished put back the line

<Republish>missing</Republish>

Wednesday, 29 April 2009

NFS bug in older SL5 kernel

As mentioned previously ( http://northgrid-tech.blogspot.com/2009/03/replaced-nfs-servers.html ) we have recently upgraded our NFS servers and they now run on SL5. Shortly after going into production all LHCb jobs stalled at Manchester and we were blacklisted by the VO.

We were advised that it may be a lockd error, and asked to use the following python code to diagnose this:

-------------------------------------------------------------------
import fcntl
fp = open("lock-test.txt", "a")
fcntl.lockf(fp.fileno(), fcntl.LOCK_EX|fcntl.LOCK_NB)
-------------------------------------------------------------------


The code did not give any errors and we therefore discounted this as the problem. Wind the clock on a fortnight (including a week's holiday over Easter) and we still have not found the problem so I tried the above code again, and bingo lockd was the problem. A quick search of the SL mailing list pointed me to this kernel bug
https://bugzilla.redhat.com/show_bug.cgi?id=459083

A quick update of the kernel and reboot and the problem was fixed.

Friday, 3 April 2009

Fixed MPI installation

Few months ago we installed MPI using glite packages and YAIM.

http://northgrid-tech.blogspot.com/2008/11/mpi-enabled.html

We never really tested it though until now. We have found few problems with YAIM:

YAIM creates an mpirun script that assumes ./ is in the path so the job was landing on WN but mpirun couldn't find the user script/executable. I corrected it prepending `pwd`/ in front of the script arguments at the end of the sript so it runs `pwd`/$@ instead of $@. I added this using yaim post functionality.

The if else statement that if used to build MPIEXEC_PATH is written in a contorted way and needs to be corrected. For example:

1) MPI_MPIEXEC_PATH is used in the if but YAIM doesn't write it in any system file that sets the env variable like grid-env.sh where the other MPI_* variable are set.

2) In the else statement there is an hardcoded path which atcually is chosen splitting the mpiexec executable MPI_MPICH_MPIEXEC points to from its directory.

3) YAIM doesn't rewrite mpirun once it's written so the hardcoded path can't be changed reconfiguring the node without manually deleting mpirun before. This make difficult to update or correct mistakes.

4) The existence of MPIEXEC_PATH is not checked and it should.

Anyway eventually we managed to run mpi jobs and we reported to the new TMB MPI working group what we have done because another site was experiencing the same problems. Hopefully they will correct these problems. Special thanks go to Chris Glasman who hunted down the inital problem with the path and patiently tested the changes we applied.

Wednesday, 25 March 2009

New Storage and atlas space tokens

We have finally installed all the units. They are ~84TB of usable space. 42TB are dedicated to atlas space tokens, the other 42TB are shared for now but will be moved into atlas space tokens when we see more usage.

We also have finally enabled all the space tokens requested by atlas. They are waiting to be inserted in Tier Of Atlas but below I report what we publish in the BDII.

ldapsearch -x -H ldap://site-bdii.tier2.hep.manchester.ac.uk:2170 -b o=grid '(GlueSALocalID=atlas*)' GlueSAStateAvailableSpace GlueSAStateUsedSpace| grep Glu
dn: GlueSALocalID=atlas,GlueSEUniqueID=dcache01.tier2.hep.manchester.ac.uk,mds
GlueSAStateAvailableSpace: 33411318000
GlueSAStateUsedSpace: 21533521683
dn: GlueSALocalID=atlas,GlueSEUniqueID=dcache02.tier2.hep.manchester.ac.uk,mds
GlueSAStateAvailableSpace: 48171274000
GlueSAStateUsedSpace: 4168774302
dn: GlueSALocalID=atlas:ATLASGROUPDISK:online,GlueSEUniqueID=bohr3223.tier2.he
GlueSAStateAvailableSpace: 1610612610
GlueSAStateUsedSpace: 125
dn: GlueSALocalID=atlas:ATLASPRODDISK:online,GlueSEUniqueID=bohr3223.tier2.hep
GlueSAStateAvailableSpace: 2154863252
GlueSAStateUsedSpace: 44160003
dn: GlueSALocalID=atlas:ATLASSCRATCHDISK:online,GlueSEUniqueID=bohr3223.tier2.
GlueSAStateAvailableSpace: 3298534820
GlueSAStateUsedSpace: 62
dn: GlueSALocalID=atlas:ATLASLOCALGROUPDISK:online,GlueSEUniqueID=bohr3223.tie
GlueSAStateAvailableSpace: 3298534883
GlueSAStateUsedSpace: 0
dn: GlueSALocalID=atlas:ATLASDATADISK:online,GlueSEUniqueID=bohr3223.tier2.hep
GlueSAStateAvailableSpace: 8052760941
GlueSAStateUsedSpace: 302738
dn: GlueSALocalID=atlas,GlueSEUniqueID=bohr3223.tier2.hep.manchester.ac.uk,mds
GlueSAStateAvailableSpace: 28580000000
GlueSAStateUsedSpace: 709076288
dn: GlueSALocalID=atlas:ATLASMCDISK:online,GlueSEUniqueID=bohr3223.tier2.hep.m
GlueSAStateAvailableSpace: 3298534758
GlueSAStateUsedSpace: 125
dn: GlueSALocalID=atlas:ATLASPRODDISK:online,GlueSEUniqueID=bohr3226.tier2.hep
GlueSAStateAvailableSpace: 2199023130
GlueSAStateUsedSpace: 125
dn: GlueSALocalID=atlas:ATLASLOCALGROUPDISK:online,GlueSEUniqueID=bohr3226.tie
GlueSAStateAvailableSpace: 3298534883
GlueSAStateUsedSpace: 0
dn: GlueSALocalID=atlas:ATLASGROUPDISK:online,GlueSEUniqueID=bohr3226.tier2.he
GlueSAStateAvailableSpace: 1610612610
GlueSAStateUsedSpace: 125
dn: GlueSALocalID=atlas:ATLASMCDISK:online,GlueSEUniqueID=bohr3226.tier2.hep.m
GlueSAStateAvailableSpace: 3298534758
GlueSAStateUsedSpace: 125
dn: GlueSALocalID=atlas:ATLASDATADISK:online,GlueSEUniqueID=bohr3226.tier2.hep
GlueSAStateAvailableSpace: 8053063554
GlueSAStateUsedSpace: 125
dn: GlueSALocalID=atlas:ATLASSCRATCHDISK:online,GlueSEUniqueID=bohr3226.tier2.
GlueSAStateAvailableSpace: 3298534820
GlueSAStateUsedSpace: 62
dn: GlueSALocalID=atlas,GlueSEUniqueID=bohr3226.tier2.hep.manchester.ac.uk,mds
GlueSAStateAvailableSpace: 35730390000
GlueSAStateUsedSpace: 1172758

Tuesday, 24 March 2009

Replaced NFS servers

The NFS servers have been replaced in Manchester with two more powerful machines and two 1TB raided SATA disks. This should hopefully put a stop to the space problems we have suffered in the past few months both with atlas and lhcb and should also allow us to keep a bit more releases than before.

We also have a nice nagios graphs to monitor the space now as well as cfengine alerts.

http://tinyurl.com/d5n7eo

Thursday, 5 March 2009

Machine room update

After some sweet-talking we managed to get two extra air-con units installed in our old machine room. This room houses our 2005 cluster and our more recent CPU and storage purchased last year. The extra cooling was noticeable and allowed us to switch on a couple of racks which were otherwise offline.


In other news, the new data centre is coming along nicely and will be ready for handover in 3/4 months from now. If you're ever racing past Lancaster on the M6 you'll get a good view of the Borg mothership on the hill, the sleak black cladding is going up now...

Friday, 13 February 2009

This week's DPM troubles at Lancaster.

We've had some interesting time this week in Lancaster, a tale of Gremlins, Greedy Daemons and Magical Faeries who come in the night and fix your DPM problems.

On Tuesday evening, when we've all gone home for the night, the DPM srmv1 daemon (and to a lesser extent the srmv2.2 and dpm daemons) started gobbling up system resources, sending our headnode into a swapping frenzy. There are known memory leak problems in the DPM code, and we've been victim of them before but in those instances we've always been saved by a swift restart of the affected services and the worse that happened was a sluggish DPM. This time the DPM servies completely froze up, and around 7 pm we started failing tests.

So coming into this disaster on Wednesday morning we leaped into action. Restarting the services fixed the load on the headnode, but the DPM still wouldn't work. Checking the logs showed that all requests were being queued, apparently forever. The trail led to some error messages in the mysqld.log;

090211 12:05:37 [ERROR] /usr/libexec/mysqld: Lock wait timeout exceeded;
try restarting transaction
090211 12:05:37 [ERROR] /usr/libexec/mysqld: Sort aborted

The oracle Google pointed that these kind of errors were indicative of a mysql server in a bad state after suddenly loosing connection to a client but not accounting for this. Various restarts, reboots and threats were used, but nothing would get the dpm working and we had to go into downtime.

Rather then dive blindly into the bowels of the DPM backend mysql we got in contact with the DPM developers on the DPM support list. They were really quick to respond, and after recieving 40MB of (zipped!) log files from us set to work developing a strategy to fix us. It appears that our mysql had grown much larger then it should have, "bloating" with historical data, which contributed to it getting into a bad state and made the task of repairing the database harder- partly as we simply couldn't restore from backups as these too would be "bloated".

After a while of bashing our heads, scouring logs and waiting for news from the DPM chaps we decided to make use of the downtime and upgrade the RAM on our headnode to 4 GB (from 2), a task we had been saving for the scheduled downtime when we finally upgrade to the Holy Grail that is DPM 1.7.X. So we slapped in the RAM, brung the machine up clearly, and left it.

A bit over an hour after it came up after the upgrade the headnode started working again. As if by magic. Nothing notable in the logs, it just started working again. The theory is that the added RAM allowed the mysql to chug through a backlog of requests and start working again. But that's just speculation. The dpm chaps are still puzzling over what happened, and our databases are still bloated, but the crisis (for now).

So there are 2 morals to this tale;
1) I wouldn't advise running a busy DPM headnode with less then 4GB of RAM, it leads to unpredictable behaviour.
2) If you get stuck in an Unscheduled Downtime you might as well make use of it to do any work, you never know when something magical might happen!

Monday, 9 February 2009

Jobmanager pbsqueue cache locked

Spent last week tracking down a problem where jobs were finishing in the batch system but the jobmanager wasn't recognizing this. This meant that jobs never 'completed' which had two major impacts, 1. Steve's test jobs all failed through timeouts and 2. Atlas production stopped because it looked like the pilots never completed and no further pilots were sent.

Some serious detective work was undertaken my Maarten and Andrey and it turned out the pbscache wasn't being updated due to a stale lock file in the ~/.lcgjm/ directory. The lock files can be found with this on the CE:

find /home/*/.lcgjm/pbsqueue.cache.proc.{hold.localhost.*,locked} -mtime +7 -ls

We had 6 users affected (alas, our important ones!), all with lock files dated Dec 22. Apparently the lcgpbs script Helper.pm would produce these whenever hostname returned 'localhost'. Yes, on December 22 we had maintenance work with DHCP unavailable, and for some brief period the CE hostname was 'localhost'. Note this is lcg-CE under glite-3.1. Happy days are here again!

Wednesday, 17 December 2008

Manchester General Changes

* Enabled users pilots for Atlas and Lhcb. Currently Lhcb is running a lot of jobs and although most is production many are from their generic users. Atlas instead seems to have almost disappeared.

* Enabled NGS VO and passed the first tests. Currently in the conformance test week.

* Enabled one shared queue and completely phased out the VO queues. This has required a transition period for some VOs to give the time to clear the jobs from the old queue and or to reconfigure their tools. This has greatly simplified the maintainance.

* Installed a top-level BDII and reconfigured the nodes to query the local top level BDII instead of the RAL one. This was actually quite easy and we should have done it earlier.

* Cleaned up old parts of cfengine that were causing the servers to be overloaded, not serve the nodes correctly and fire off thousands of emails a day. Mostly this was due to an overlap in the way cfexecd was run both as a cron job and as a daemon. However we also increased TimeOut and SplayTime values and introduced explicitely the schedule parameter in cfagent.conf. Since then cfengine hasn't had anymore problems.

* Increased usage of YAIM local/post functions to apply local overrides or minor corrections to yaim default. Compared to inserting the changes in cfengine this method has the benefit of being integrated and predictable. When we run yaim the changes are applied immediately and don't get overridden.

* New storage: our room is full and when the clusters are loaded we hit the power/cooling limit and we risk to draw power from other rooms, due to this problem the CC people don't want us to switch on new equipment without switching off some old one to maitain the balance in the power consumption. So eventually we have bought 96 TB of raw space to get us going. The kit has arrived yesterday and needs to be installed in the rack we have and power measures need to be taken to avoid switching off more than the necessary amount of nodes. Luckily it will not be many anyway (even taking the nominal value on the back of the new machines it would be 8 nodes but with better power measures it could be as many as 4) because the new machines consume much less then the DELL nodes that are now 4 years old. However buying new CPUs/storage cannot be done without switching off a significant fraction of the current CPUs before switching on the new kit and requires working in tight cooperation with CCS people which has now been agreed after a meeting I had last week with them and their management.

Tuesday, 16 December 2008

Phasing out VO queues

I've started to phase out VO queues and to create VO shared queues. The plan is eventually to have 4 queues called with a leap of imagination short, medium, long and test with the following characteristics:

test: 3h/4h; all local VOs
short: 6h/12h; ops,lhcbsgm,atlasgm
medium: 12h/24h all VOs and roles but those in short queue and production
long: 24h/48h all VOs and roles but those that can access the short queue

Installing the queues, adding the groups ACLs and publishing them is not difficult. YAIM (glite-yaim-core-4.0.4-1, glite-yaim-lcg-ce-4.0.4-2 or higher) can do it for you. Otherwise it can be done by hand which is still easy but is more difficult to maintain (the risk to override is always high and files need to be maintained in cfengine or cvs or else).

The problem for me is that this scheme works only if the users select the correct ACLs and a suitable queue with the right length for their jobs in their JDL. If they don't the queue chosen by the WMS is random with high probability of jobs failing because they end up in a queue that is too short or into a queue that doesn't have the right ACLs. So I'm not sure if it's really a good idea even if it is much easier to maintain and allows a bit more sophisticated setups.

Anyway if you do it by YAIM all you have to do is to add the queue to

QUEUES="my-new-queue other-queues"

add the right VO/FQAN to the new queue _GROUP_ENABLE variable (remember to convert . and - into _

MY_NEW_QUEUE_GROUP_ENABLE="atlas /atlas/ROLE=pilot other-vos-or-fqans"

the syntax of GROUP_ENABLE has to be the same as the one you have used in group.conf (see previous post http://northgrid-tech.blogspot.com/2008/12/groupsconf-syntax.html)

And finally add to site-info.def

FQANVOVIEWS=yes

to enable publishing of the ACL in the GIP.

Rerun YAIM on the CE as normal.

To check everything is ok on the CE

qmgr -c 'p q my-new-queue'

ldapsearch -x -H ldap://MY-CE.MY-DOMAIN:2170 -b GlueCEUniqueID=MY-CE.MY-DOMAIN:2119/jobmanager-lcgpbs-my-new-queue,Mds-Vo-name=resource,o=grid

among other things, if correctly configured it should list the GlueCEAccessControlBaseRules for each VO and FQAN you have listed in _GROUP_ENABLE.

If a
GlueCEAccessControlBaseRule: DENY:FQAN field appears that's the ACL for VOViews not the access to the queue.

Thanks to Steve and Maria for pointing me to the right combination of YAIM packages and confirming the randomness WMS matchmaking.

Monday, 15 December 2008

groups.conf syntax

Elena asked about it few days ago on TB-SUPPORT. Today I investigated a bit further and the result is that for glite-yaim-core versions >4.0.4-1:

* Even if it still works the syntax with VO= and GROUP= is obsolete. The new syntax is much simpler as it uses directly the FQANs as reported in the VO cards (if they are maintained).

* The syntax in /opt/glite/yaim/examples/groups.conf.example is correct and the files in the directory are kept up to date with the correct syntax although the examples might not be valid.

* Further information can be found either in

/opt/glite/examples/groups.conf.README

or

https://twiki.cern.ch/twiki/bin/view/LCG/YaimGuide400#Group_configuration_in_YAIM

which is worth to periodically review for changes.

Monday, 1 December 2008

RFIO tuning for Atlas analysis jobs

A little info about the RFIO settings we've tested at Liverpool.

Atlas analysis jobs running on a site using DPM use POSIX access through the RFIO interface. ROOT (since v5.16 IIRC) has support for RFIO access and uses the buffered access mode READBUF. This allocates a static buffer for files read via RFIO on the client. By default this buffer is 128kB.

Initial tests with this default buffer size showed a low cpu efficiency and a high rate of bandwidth usage, far more than the size of the files being accessed. The buffer size can be altered by including a file on the client called /etc/shift.conf containing

RFIO IOBUFSIZE XXX

where XXX is the size in bytes. Altering this setting gave the following results

Buffer (MB), CPU (%), Data transferred (GB)
0.125, 60.0, 16.5
1.000, 23.0, 65.5
10.00, 13.5, 174.0
64.00, 62.1, 11.5
128.0, 74.7, 7.5

This was on a test data set with file sizes of ~1.5GB and using athena 14.2.10.

Using buffer sizes of 64MB+ gives gains in efficiency and required bandwidth. A 128MB buffer is a significant chunk of a worker node's RAM, but as the files are not being cached in the linux file cache the ram usage is likely similar to accessing the file from local disk, and the gains are large.

For comparison the same test was run from a copy of the files on local disk. This gave a cpu efficiency of ~50% but the event rate was ~8 times slower than when using RFIO.

My conclusions are that RFIO buffering is significantly more efficient than standard linux file caching. The default buffer size is insufficient and increasing by small amounts greatly reduces efficiency. Increasing the buffer to 64-128MB gives big gains without impacting available RAM too much.

My guess about why only a big buffer gives gains may be due to the random access on the file by the analysis job. Reading in a small chunk, eg 1MB, may buffer a whole event but the next event is unlikely to be in that buffered 1MB, so another 1MB has to be read in for the next event. Similarly for 10MB, although this time the amount read in each time is 10x as much but with a less than 10x increase in probability of the event being in the buffer. When the buffer reaches 64MB the probability of an event being in the buffered area is high enough to offset the extra data being read in.

Another possibility is that the buffering only buffers the first xMB of the file, hence a bigger buffer means more of the file is in RAM and there's a higher probability of the event being in the buffer. Neither of these hypotheses have been investigated further yet.

Large block reads are also more efficient when reading in the data than lots of small random reads. The efficiency effectively becomes 100% if the buffer size is >= the dataset file size; the first reads pull in all of the file and all reads from then are from local RAM.

This makes no difference to the impact on the head node for eg SURL/TURL requests, only the efficiency of the analysis job accessing the data from the pool nodes and the required bandwidth (our local tests simply used the rfio:///dpm/... path directly). If there are enough jobs there will still be bottle necks on the network, either at switch or pool node. We have given all our pool nodes at least 3Gb/s connectivity to the LAN backbone.

The buffer size setting will give different efficiency gains for different file sizes (ie the smaller filesize, the better the efficiency), eg the first atlas analysis test had smaller file sizes than our tests and showed much higher efficiencies. The impact of the BUFSIZE setting on other VO's analysis jobs that use RFIO hasn't been tested.

Friday, 28 November 2008

Nagios Checker

Nagios checker is a firefox plugin that can replace nagios email alerts with colourful, blinking and possibly noisy icons at the bottom of your firefox window.

The icon expands into prolematic hosts lines when the cursor goes on top of it and with the right permissions if you click on the hosts it goes to the hosts nagios page.

https://addons.mozilla.org/en-US/firefox/addon/3607

To configure it to read NorthGrid nagios:

* Go to settings (right-click on the nagios icon on firefox)

* Click Add new

* In the General tab:
** Name: whatever you like
** WEB URL: https://niles004.tier2.hep.manchester.ac.uk/nagios
** Tick the nagios older than 2.0 box
** User name: your DN
** Status script URL: https://niels004.tier2.hep.manchester.ac.uk/nagios/cgi-bin/status.cgi
** Click Ok

If you want only your site machines

* Go to the filters tab and
** Tick the 'Hosts matching regular expressions' box
** Insert your domain name in the test-box
** Tick the reverse expression box.
** Click ok

For the rest you can adjust it as you please I removed the noises and inserted a 3600 sec refresh interval.

Drawbacks if you add other nagios end-points:

* Settings are applied to all of them
* If the host names in your other nagios have a different domain name (or don't have it at all) they don't get filtered.

Perhaps another method might be needed. Investigating.

Manchester and Lhcb

Manchester is now officially part of Lhcb and all they CPU hours will have full weight!! Yuppieee!! :)

Thursday, 27 November 2008

Black holes detection

Finding out black holes is always a pain... However the pbs accounting records can be of help. A simple script that counts the number of jobs a node swallows makes some difference:

http://www.sysadmin.hep.ac.uk/svn/fabric-management/torque/jobs/black-holes-finder.sh

I post it just in case other people are interested.

An example of the output:

# black-holes-finder.sh

Using accounting file 20081127
[...]
bohr5029: 1330
bohr5030: 1803


clearly the two nodes above have a problem.

MPI enabled

Enabled MPI in Manchester using YAIM and the recipe from Stephen Childs I found in the links below:

http://www.grid.ie/mpi/wiki/YaimConfig

http://www.grid.ie/mpi/wiki/SiteConfig

Caveats:

1) The documentation will move to probably the YAIM official pages

2) The location of the gip files is now under /opt/glite not /opt/lcg

3) Scripts DO interfere with the current setup on the WNs if run on their own so you need to reconfigure the whole node (I made the mistake of running only MPI_WN). On the CE instead it's enough to run MPI_CE.

4) MPI_SUBMIT_FILTER variable in site-info.def is not documented (yet). It enables the section of the scripts that rewrites torque submit_filter script that allocates the correct number of CPUs

5) Yaim doesn't publish MPICH (yet?) so I had to add the following lines

GlueHostApplicationSoftwareRunTimeEnvironment: MPICH
GlueHostApplicationSoftwareRunTimeEnvironment: MPICH-1.2.7

to /opt/glite/etc/gip/ldif/static-file-Cluster.ldif manually.

Tuesday, 25 November 2008

Regional nagios update

I reinstalled the regional nagios with Nagios3 and it works now.

https://niels004.tier2.hep.manchester.ac.uk/nagios

As suggested by Steve I'm also trying the nagios checker plugin

https://addons.mozilla.org/en-US/firefox/addon/3607

instead of the email notification but I still have to configure things properly. At the moment firefox makes some noise every ~30 seconds and there is also a visual alert on the bottom right corner of the firefox window with the number of services in critical state which expands to show the services when the cursor points at it. Really nice. :)